125cc Sportsbikes Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter · #1 ·
Can anyone tell me if the clutch cable is any different on different year model bikes?
I ordered one for my 93 model but it is just too short, also the one on my bike has a curved section where it connects to the clutch handle where as the one I was given is just straight. The part number for the one I ordered is 800077777.
 

·
Registered
Joined
·
2,881 Posts
Can anyone tell me if the clutch cable is any different on different year model bikes?
I ordered one for my 93 model but it is just too short, also the one on my bike has a curved section where it connects to the clutch handle where as the one I was given is just straight. The part number for the one I ordered is 800077777.
Hi !

This one should tell it all : "8000-77777". that aint at least for older mito's because it has numbers-7xxxxx.
Are you sure that your bike is '93 model (mk2) and not '90~92 mk1 ?

little bit confusing is the fact that old Mk2 Mito's do have almoust all parts listed as -7xxxx (starting with no: 7) but many parts are from mk1 with mk1 Part Numbers..

bye !
markus
 

·
Registered
Joined
·
2,881 Posts
Hi !

You defenitely have got an offical Australian model, because that sort of metal label aint in all models..

Would be very lovely to have moro photos from your Mito, please ?

Basically the easyest way for you to identify your mito is to see if it has USD forks in it.
-Mk1 '90 naked Normal forks
-mk1 '91~92 full fairing Normal Forks
-mk2 '92~ USD forks

Cagiva made at least 2 different Mk2 Lawson Replica paint job's:
Here's 1 of them :
http://www.bikepics.com/pictures/058399/
http://www.bikepics.com/pictures/058401/
http://www.bikepics.com/pictures/058400/
http://www.bikepics.com/pictures/058403/
http://www.bikepics.com/pictures/653470/

By looking a "Bikepics.com" found these, a lot of evidence..

Clutch cable's at Mk2's:

http://www.bikepics.com/pictures/134383/
http://www.bikepics.com/pictures/058314/
http://www.bikepics.com/pictures/779065/
http://www.bikepics.com/pictures/779068/
http://www.bikepics.com/pictures/788678/
http://www.bikepics.com/pictures/721291/
http://www.bikepics.com/pictures/399845/
http://www.bikepics.com/pictures/625774/
http://www.bikepics.com/pictures/100632/
http://www.bikepics.com/pictures/740998/
http://www.bikepics.com/pictures/052799/

Clutch cable at Mk1
http://www.bikepics.com/pictures/332980/
http://www.bikepics.com/pictures/279125/
http://www.bikepics.com/pictures/059762/
http://www.bikepics.com/pictures/048142/

Seems that Mk1 & Mk2 have got the same Clutch cable..

Little odd straight.. "Mitogeri's"
http://www.bikepics.com/pictures/694800/

bye

markus
 

·
Registered
Joined
·
68 Posts

·
Registered
Joined
·
646 Posts
i don't think the cables are different between the 2...

there is simply a problem when you put it back on the bike....

the part that is screwed on the cylinder must be pushed with a screwdriver to fit the cable good ...i had the same problem ...it's just a setting problem....
 

·
Registered
Joined
·
2,881 Posts
i don't think the cables are different between the 2...
...
Hi !

Maltoch quotes his opinion towards Mk1 and Mk2. about that their cables are the same.
EVO is the straight1 like Anand said.

bye

markus
 

·
Registered
Joined
·
68 Posts
Discussion Starter · #10 ·
If anyone wants to know. The part number for the '93 and below clutch cable is 800066166.
There was also a big difference in price.
800066166 @ $47.40 Aust.
800077777 @ $95 Aust.


Now if I can just get my bike started
 

·
Registered
Joined
·
643 Posts
Meh - universal clutch cable kit, includes 60" of cable and a variety of ends and rubber sheath - ?10 from me local bike shop. Trim to length, pass thru the current cable's curved section, solder the ends on via gas-stove and electrical solder. ALWAYS worked for me.
 

·
Registered
Joined
·
1,126 Posts
can a clutch cable for mito '93 (part # 800066166) fit an evo?
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top