125cc Sportsbikes Forum banner
1 - 20 of 36 Posts

·
Registered
Joined
·
6,440 Posts
Bigworm, that set up looks really nice lit up! Like how the revometer goes around the top, would be better watching the revs fly up and down on that than the stock set-up!

I'd like to get some rev lights but i dont think i have the balls to mess around with the electrics on the mito.
 

·
Registered
Joined
·
720 Posts
I had a digital speedo in my car. The problem with them is with all digital gauges its impossible to judge the rate of change, so you look at it, it says 60, you look back at the road. How do you know if you are changing speed? At least with a needle you can see it move.
 

·
Registered
Joined
·
289 Posts
trouble with going digital on the mito is that the revs on the engine are cable driven and so is the speed

the speed is easy to overcome you get in the pack a sensor and magnet
place the magnet on any wheel with the sensor next to it

the revs
on my wiring diagram it says you can splice into the coil to get a reading for revs

mines using a 3ma motor with a output on the cdi so no probs splicing into the wiring
 
1 - 20 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top