125cc Sportsbikes Forum banner
1 - 14 of 14 Posts

·
CBR125 Section SuperMod!
Joined
·
6,698 Posts
its not a restrictor...........
 

·
Wheelies on peds with no gear = win
Joined
·
5,960 Posts
lol
 

·
Registered
Joined
·
3,551 Posts
That'd be the baffle!

sack the original can off and look on Egay for a decent can.
 

·
125cc's saddest c*nt
Joined
·
5,140 Posts
There is no restrictor as such but the exhaust is restrictive due to having a lot of baffling and a cat. A lot of the restriction there is on the CBR is in the front pipe. If you want performance gains you need a full system. Talking about 20% or 2bhp depending on how you want to look at it when fitted.
 

·
Registered
Joined
·
112 Posts
Discussion Starter · #6 ·
There is no restrictor as such but the exhaust is restrictive due to having a lot of baffling and a cat. A lot of the restriction there is on the CBR is in the front pipe. If you want performance gains you need a full system. Talking about 20% or 2bhp depending on how you want to look at it when fitted.
Thought the front pipe had a cat in it.
The restrictor i am talking about is actualy in the end of the front pipe & sticks into the end can when you bolt it on, if you look at the diagram in my first post it is clearly visable sticking out of the end of the front pipe where the end can bolts on.

Chris.
 

·
Wheelies on peds with no gear = win
Joined
·
5,960 Posts
N4h 7h3r35 4 r3571c710n 1n teh h34d

0r 47l3457 D0nny 54y5
 

·
Wheelies on peds with no gear = win
Joined
·
5,960 Posts
Can you not read 1337?
 

·
Wheelies on peds with no gear = win
Joined
·
5,960 Posts
I'll translate -

N4h 7h3r35 4 r3571c710n 1n teh h34d

0r 47l3457 D0nny 54y5
Nah theres a restriction in the head

or atleast Donny says.
 

·
Wheelies on peds with no gear = win
Joined
·
5,960 Posts
I think there's a restriction somewhere between Honda and the thai company that makes the bike
That'll be the head then?
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top