125cc Sportsbikes Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter · #1 ·
Evening all!

I'm breaking an unfinished project, if anyone is after anything just let me know, I am currently in the process of dismantling one of my spare engines. I have a black powder coated frame, yokes with brand new taper roller head bearings fitted, A straight black front wheel fitted with captive wheel spacers and new bearings. I am currently selling a polished swingarm with brand new unfitted bearings on fleabay. There is a brand new (still packaged m max box), goodrich braided lines, spare bare frame, various swingarms, early and late spec rear shocks, I may also sell on my modified Rs250 shock (set up for 14 stone rider inc. kit).



I also have a complete engine with carbs, airbox, cooling system (top and bottom rads/fan etc) all still plumbed together ready to slot into the frame from a running bike which if someone offers me enough I may be convinced to part with - but it would have to be decent money as I am deeming this my current spare set up.

Basically there are loads of other parts, calipers (f+r), side stand, levers/assemblies, too much to list just ask.

I have started to list various items in the for sale section, more to follow. As some of you may be aware I am quite active on another forum, alot of these items have not been listed on any other forum, you seem to be a good bunch so you get first dibs if you are intereted in anything.

I'm also condidering modifying another mito rear end - comes as a complete bolt on kit, again let me know if there is any interest. Picture is of a previous set unit/subframe combo I made (pictures for reference).




Cheers, all the best Paul.
 

·
Registered
Joined
·
2,873 Posts
is that a cagiva mito rear tail piece lol

i need a decent set of forks and a sump casing?

cheers macey
 

·
Registered
Joined
·
202 Posts
Discussion Starter · #4 ·
Hi Macey,
I can sort you out with a sump casing good solid condition the only damage is to one of the four fins on the bottom, doesn't affect how it works though, ?15 to your door. The forks went a few weeeks ago to a guy in France.

...and yes that's a mito rear which I've modified to suit an nc I've got one fitted to my own bike (old picture)

 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top