125cc Sportsbikes Forum banner
1 - 1 of 1 Posts

8 Posts
Discussion Starter · #1 ·
Hello. Anyone have reccomened squish on a Mito 125? Manual says 1,55-1,6, but on every forum or threads I have read, they reccomend lower for some resason. I have measured with a measurement clock as per manual, and need a 0.8 base( manual says stock is 0,5)
Font Rectangle Parallel Engineering Circle

Font Number

gasket to get 1,55mm squish. Original A0401 sylinder, but now using a Mitska and 200c dome head. But Im confused if this it what I should have.
1 - 1 of 1 Posts